Which Devices Are Best for 50ml Shortfills?
A practical guide to matching Imp Jar's 50/50 shortfills with the right pod kits, starter kits and tanks for the smoothest, most flavourful vape.
The short answer
Imp Jar 50ml shortfills are blended at 50% VG and 50% PG, a ratio built specifically for mouth to lung pod kits, starter kits and MTL tanks rather than high powered sub-ohm devices. If your kit has a coil resistance above roughly 0.8 ohm, an Imp Jar shortfill should wick and perform well.
Browse the Imp Jar Originals range
50ml shortfills in disposable inspired flavours, ready to mix with a nic shot of your choice. UK made in Maidstone, Kent.
Why coil resistance matters
A coil with higher resistance heats more gently and works best with thinner liquid, which is exactly what a 50/50 blend provides. Lower resistance sub-ohm coils run hotter and are designed for thicker, higher VG liquid that produces bigger clouds. Putting a 50/50 shortfill into a sub-ohm coil built for 70/30 or higher liquid can lead to flooding and a wetter, less satisfying draw, while putting a thick liquid into a small pod coil can starve the wick and cause a burnt taste.
Device types that suit Imp Jar shortfills
Refillable pod kits, MTL starter kits and tanks with coils above 0.8 ohm are the natural home for a 50/50 blend. These are the same style of devices most vapers move to after leaving disposables behind, since the draw and throat hit feel familiar.
Quick compatibility guide
| Device type | Typical coil resistance | Suited to Imp Jar 50/50? |
|---|---|---|
| Refillable pod kit | 0.8 to 1.2 ohm | Yes, ideal match |
| MTL starter tank | 1.0 to 1.6 ohm | Yes, ideal match |
| Sub-ohm tank | 0.15 to 0.5 ohm | Not recommended, choose a higher VG liquid instead |
If you are coming straight from a disposable vape, look for a starter kit described as MTL or pod style. These are designed around exactly the same coil range that suits an Imp Jar shortfill.
Common questions about device compatibility
Can I use an Imp Jar shortfill in a sub-ohm tank?
You can but it is not the ideal pairing. A 50/50 liquid in a sub-ohm coil tends to flood and may taste wetter than expected, since sub-ohm coils are built around thicker liquid.
How do I know my coil resistance?
It is usually printed directly on the coil head itself or listed in the product description of the tank or pod on the retailer's website.
Will the liquid damage my device if I use the wrong coil?
No, it will not damage the device but you may notice a less satisfying draw, leaking or a shortened coil lifespan if the ratio and coil resistance are badly mismatched.
Part of the Imp Jar 50ml guides hub
This page is part of our complete Imp Jar 50ml guide series. Return to the Imp Jar 50ml Guides Hub for the full topic overview. Browse the related guides below.