How Do You Add Nic Shots to a 50ml Shortfill?
A step by step mixing guide covering the exact process, strength options and answers to the questions vapers ask most when mixing for the first time.
The short answer
Adding a nic shot to an Imp Jar 50ml shortfill is a simple pour, seal and shake process that takes under a minute. Once mixed, your 50ml of nicotine free liquid becomes 60ml of nicotine containing e-liquid at a low, predictable strength. No special tools or technical know-how are required, just a steady hand and a clean surface.
Browse the Imp Jar Originals range
50ml shortfills in disposable inspired flavours, ready to mix with a nic shot of your choice. UK made in Maidstone, Kent.
What you need before you start
You only need two items, a 50ml Imp Jar shortfill bottle and a single 10ml nic shot at your preferred strength, usually 18mg or 20mg. Work over a clean dry surface in case of small spills and have a paper towel nearby to wipe the nozzle afterwards.
Step by step instructions
- Remove the cap from the 60ml shortfill bottle and gently lift the nozzle insert using your thumb or a flat tool.
- Unscrew the cap from the nic shot and pour the entire 10ml contents into the shortfill bottle.
- Press the nozzle insert back into place and screw the cap on firmly.
- Shake the bottle vigorously for 20 to 30 seconds, until the liquid moves freely and looks evenly combined.
- Leave the bottle to settle for a few minutes before your first fill, to let any air bubbles clear.
Matching the strength to your preference
Most Imp Jar shortfill users add a single 18mg nic shot for a 3mg finished strength, which suits most mouth to lung pod kits and tanks comfortably. If you want something milder, you can pour in only half the nic shot for roughly 1.5mg, decanting the unused half into a small empty bottle for later.
| Nic shot added | Resulting strength in 60ml | Best suited to |
|---|---|---|
| Half an 18mg nic shot | Approximately 1.5mg | Vapers reducing nicotine gradually |
| Full 18mg nic shot | Approximately 3mg | Most pod kit and MTL tank users |
| Full 20mg nic salt shot | Approximately 3.3mg | Vapers who prefer a smoother salt hit |
Common questions about mixing
Do I need to leave the bottle to steep?
Steeping is optional. The e-liquid is safe to vape immediately after shaking, although some flavours taste slightly smoother after resting for a few hours.
What if I spill a little nic shot?
Wipe the area immediately with a damp cloth and wash your hands thoroughly. A small spill is not dangerous but nicotine should not be left on skin or surfaces.
Can I use a nic shot from a different brand?
Yes, nic shots are generally interchangeable between brands as they are unflavoured. Just try to match the VG and PG ratio to your shortfill where possible.
Part of the Imp Jar 50ml guides hub
This page is part of our complete Imp Jar 50ml guide series. Return to the Imp Jar 50ml Guides Hub for the full topic overview. Browse the related guides below.