Imp Jar 100ml Adding Nic Shots Guide

How Do You Add Nic Shots to a 100ml Shortfill?

A step by step mixing guide for the 100ml format, covering both nic shots, shake time and how to adjust the finished strength.

2 nic shotsNeeded to reach approximately 3mg in a 100ml bottle
30-40 secondsRecommended shake time for an even mix
No steeping neededLiquid is ready to vape straight after mixing

The short answer

Adding nic shots to an Imp Jar 100ml shortfill works exactly like the 50ml version, just with two nic shots instead of one. Pour both 10ml shots into the bottle, reseal it, shake thoroughly and you have 120ml of finished e-liquid ready to vape.

Browse the Imp Jar Originals range

100ml shortfills in disposable inspired flavours, ready to mix with nic shots of your choice. UK made in Maidstone, Kent.

What you need before you start

You need one 100ml Imp Jar shortfill bottle and two 10ml nic shots at your preferred strength, usually 18mg or 20mg. Work over a clean dry surface in case of small spills and have a paper towel nearby to wipe the nozzle afterwards.

Step by step instructions

  1. Remove the cap from the 120ml shortfill bottle and gently lift the nozzle insert.
  2. Unscrew the cap from your first 10ml nic shot and pour the entire contents into the shortfill bottle.
  3. Repeat with the second nic shot if you want a full 3mg strength.
  4. Press the nozzle insert back into place and screw the cap on firmly.
  5. Shake the bottle vigorously for 30 to 40 seconds, slightly longer than a 50ml bottle given the larger volume.
  6. Leave the bottle to settle for a few minutes before your first fill, so any air bubbles clear.
Not sure how many shots to use for your preferred strength? See our guide on how many nic shots a 100ml shortfill needs.

Adjusting the strength

Nic shots added Resulting strength in 120ml
One 18mg nic shot Approximately 1.5mg
Two 18mg nic shots Approximately 3mg
Two 20mg nic salt shots Approximately 3.3mg

If you only want a milder strength, you can add a single nic shot rather than two, leaving the remaining 10ml of headroom in the bottle unused.

Common questions about mixing a 100ml bottle

Do I need to shake it for longer than a 50ml bottle?

A slightly longer shake helps given the larger volume, around 30 to 40 seconds is generally enough to combine everything evenly.

Can I add the two nic shots at different times?

It is best to add both shots in one sitting and shake together, rather than topping up later, to keep the nicotine evenly distributed throughout the bottle.

What if I only have one nic shot to hand?

You can add a single shot for a milder strength and top up with the second later, just give the bottle another thorough shake once the second shot goes in.

Part of the Imp Jar 100ml guides hub

This page is part of our complete Imp Jar 100ml guide series. Return to the Imp Jar 100ml Guides Hub for the full topic overview. Browse the related guides below.